Stabilization of post-experiment nuclear materials in Plutonium Fuel Research Facility

Sato, Takumi; Otobe, Haruyoshi; Morishita, Kazuki; Marufuji, Takato; Ishikawa, Takashi; Fujishima, Tadatsune; Nakano, Tomoyuki

JAEA-Technology 2023-016, 41 Pages, 2023/09

JAEA-Technology-2023-016.pdf:2.74MB

This report summarizes the results of the stabilization treatments of post-experiment nuclear materials in Plutonium Fuel Research Facility (PFRF) from August 2018 to March 2021. Based on the management standards for nuclear materials enacted after the contamination accident that occurred at PFRF on June 6, 2017, the post-experiment nuclear materials containing plutonium (Pu): samples mixed with organic substances that cause an increase in internal pressure due to radiolysis (including X-ray diffraction samples mixed with epoxy resin and plutonium powder which caused contamination accidents), carbides and nitrides samples which is reactive in air, and chloride samples which may cause corrosion of storage containers, were selected as targets of the stabilization. The samples containing organic materials, carbides and nitrides were heated in an air flow at 650 C and 950 C for 2 hours respectively to remove organic materials and convert uranium (U) and Pu into oxides. U and Pu chlorides in LiCl-KCl eutectic melt were reduced and extracted into liquid Cd metal by a reaction with lithium (Li) -cadmium (Cd) alloy and converted to U-Pu-Cd alloy at 500 C or higher. All of the samples were stabilized and stored at PFRF. We hope that the contents of this report will be utilized to consider methods for stabilizing post experiment nuclear materials at other nuclear fuel material usage facilities.

Revision of the criticality safety handbook in light of the reality of the nuclear fuel cycle in Japan; With a view to transportation and storage of fuel debris

Suyama, Kenya; Ueki, Taro; Gunji, Satoshi; Watanabe, Tomoaki; Araki, Shohei; Fukuda, Kodai

Proceedings of 20th International Symposium on the Packaging and Transportation of Radioactive Materials (PATRAM22) (Internet), 5 Pages, 2023/06

Since the 1990s, the importance of the handbook has changed significantly, as the computational power has improved and continuous energy Monte Carlo codes have become widely used, which enables highly accurate criticality calculations, when necessary, irrespective of the complexity of the system. Because the value of performing a large number of calculations in advance and summarizing the data has decreased, since the second edition was published publicly in 1999, there has been no revision of criticality safety handbooks in Japan for nearly a quarter of a century. In Japan, where the Fukushima Daiichi Nuclear Power Plant accident occurred in 2011, it became necessary to deal with criticality safety issues in the transport and storage of the fuel debris which contains complex constituent elements, and the summary the criticality safety management for such material is an urgent issue. In the area of burnup credit, the transport and storage of fuel assemblies with low achieved burnups due to the consequences of accidents might be the problem. In addition, nuclear data, which is the input for the continuous energy Monte Carlo code, has been improved several times, now JENDL-5 is available from the end of 2021, and its incorporation becomes a need in the field. This report provides an overview of the latest criticality safety research in Japan and the planned revision of the Criticality Safety Handbook, which could be applied to the transport and storage sectors.

Machine learning molecular dynamics simulations for evaluation of high-temperature properties of nuclear fuel materials

Kobayashi, Keita; Nakamura, Hiroki; Itakura, Mitsuhiro; Machida, Masahiko; Okumura, Masahiko

Materia, 62(3), p.175 - 181, 2023/03

https://doi.org/10.2320/materia.62.175

no abstracts in English

Sodium-cooled Fast Reactors

Ohshima, Hiroyuki; Morishita, Masaki*; Aizawa, Kosuke; Ando, Masanori; Ashida, Takashi; Chikazawa, Yoshitaka; Doda, Norihiro; Enuma, Yasuhiro; Ezure, Toshiki; Fukano, Yoshitaka; et al.

Sodium-cooled Fast Reactors; JSME Series in Thermal and Nuclear Power Generation, Vol.3, 631 Pages, 2022/07

https://shop.elsevier.com/books/sodium-cooled-fast-reactors/morishita/978-0-12-824076-2

This book is a collection of the past experience of design, construction, and operation of two reactors, the latest knowledge and technology for SFR designs, and the future prospects of SFR development in Japan. It is intended to provide the perspective and the relevant knowledge to enable readers to become more familiar with SFR technology.

Time dependence of corrosion behavior on Ta in NaOH solutions

Ishijima, Yasuhiro; Ueno, Fumiyoshi; Abe, Hitoshi

Materials Transactions, 63(4), p.538 - 544, 2022/04

https://doi.org/10.2320/matertrans.MT-C2021005

The time dependence of the corrosion behavior of tantalum (Ta), which is used in nuclear fuel reprocessing equipment, in sodium hydroxide (NaOH) solutions was investigated by immersion tests, and the mechanism of the time dependence was examined via surface observations and electrochemical measurements. The immersion tests were conducted at room temperature with NaOH concentrations ranging from 1 to 7 mol/L for immersion periods of 24 to 168 h. The corrosion rate increased with the NaOH concentration but peaked with the immersion period and then decreased. The time to peak of the corrosion rate was shorter with higher NaOH concentration. The X-ray diffraction (XRD) patterns and Raman spectra of the surfaces of the specimens immersed in the 7 mol/L NaOH solution for more than 48 h showed NaTaO formation. The polarization resistance decreased with immersion time for all NaOH concentrations up to about 24 h after immersion. Thereafter, the polarization resistance increased with immersion time in 7 mol/L NaOH solution and remained almost constant in the other NaOH concentrations. Findings suggested that the change in the corrosion rate was affected by the film formation during immersion, since the time dependence of the polarization resistance and the sum of film resistance and charge transfer resistance had the same tendencies. The precipitation film was mainly NaTaO formed by the dissolution of the passivity film on Ta.

Effective use of uranium resources; Communicate the power of a closed cycle

Sagayama, Yutaka; Sawada, Tetsuo*; Tanaka, Harukuni*

Enerugi Foramu, (807), p.18 - 22, 2022/03

Discussing the necessity of the nuclear fuel cycle, its future, and issues (costs, pros and cons of the LWR cycle, etc.). The trend toward carbon neutrality will lead to a rush to build nuclear (light water reactor) power plants in many countries. As a result, the price of natural uranium is expected to skyrocket, increasing the need for fast reactor cycle development. It is essential to present to the world the concept of commercialization of fast reactors that combine high safety and economic efficiency, and to proceed with development steadily in order to realize it promptly, without dissipating the technologies for design, construction, operation, and maintenance of fast reactors that Japanese industry and JAEA have accumulated through the development of MONJU and other projects.

Stabilization treatment of Pu-bearing organic materials

Morishita, Kazuki; Sato, Takumi; Onishi, Takashi; Seki, Takayuki*; Sekine, Shinichi*; Okitsu, Yuichi*

JAEA-Technology 2021-024, 27 Pages, 2021/10

JAEA-Technology-2021-024.pdf:2.41MB

In the case of Plutonium (Pu)-bearing organic materials, organic materials are decomposed by alpha rays emitted mainly from Pu to generate hydrogen gas and other substances. Therefore, to safely store Pu-bearing organic materials for an extended period of time, organic materials must be eliminated. In addition, carbide and nitride fuels must be converted into oxides for safe storage in order to prevent the exothermal reaction of these fuels with oxygen/moisture in air. A survey of the literature on the stabilization treatment of Pu-bearing organic materials confirmed that organic materials can be decomposed and removed by heating at 950 C (1223.15 K) or greater in air. Furthermore, based on the calculated thermodynamic parameters of oxidation reaction of carbide and nitride fuels in air, it was estimated that these fuels would be oxidized in air at 950 C because the equilibrium oxygen partial pressure in the oxidation reaction at 950 C was lower than 2.110 Pa (oxygen partial pressure in air). Therefore, it was decided to stabilize Pu-bearing organic materials by heating at 950 C in air to remove the organic materials and oxidize the carbide and nitride fuels. As a mock-up test to remove the organic materials, thin sheets of epoxy resin were heated in air. The changes in appearance and weight before and after heating in air showed that organic materials can be removed. After the mock-up test, Pu-bearing organic materials were also stabilized by heating in the similar condition.

Distribution of studtite and metastudtite generated on the surface of UO; Application of Raman imaging technique to uranium compound

Kusaka, Ryoji; Kumagai, Yuta; Yomogida, Takumi; Takano, Masahide; Watanabe, Masayuki; Sasaki, Takayuki*; Akiyama, Daisuke*; Sato, Nobuaki*; Kirishima, Akira*

Journal of Nuclear Science and Technology, 58(6), p.629 - 634, 2021/06

https://doi.org/10.1080/00223131.2020.1854881

Determination of alkali and alkaline earth elements in radioactive waste generated from reprocessing plant by liquid electrode plasma optical emission spectrometry

Yamamoto, Masahiko; Do, V. K.; Taguchi, Shigeo; Kuno, Takehiko; Takamura, Yuzuru*

Journal of Radioanalytical and Nuclear Chemistry, 327(1), p.433 - 444, 2021/01

https://doi.org/10.1007/s10967-020-07490-1

A simple, practical, and reliable analytical method for determination of Na, K, Ca, Sr, and Ba by liquid electrode plasma optical emission spectrometry is developed. Appropriate emission lines for quantification, interferences from co-existing elements, and effect of measurement conditions with cell damage have been investigated. The spike and recovery tests using actual sample have been performed for method validation, and negligible sample matrix effect has been observed. Consequently, the method is successfully applied to several radioactive wastes. The obtained data have been agreed well with data from computer calculation and inductively coupled plasma optical emission spectrometry within 10% difference.

Promoting nuclear fuel cycle and ensuring nuclear non-proliferation/nuclear security

Tamai, Hiroshi; Mochiji, Toshiro; Senzaki, Masao*; Iwamoto, Tomonori*; Ishiguro, Yuzuru*; Kitade, Yuta; Sato, Heigo*; Suehiro, Rie*; Taniguchi, Tomihiro*; Fukasawa, Tetsuo*; et al.

Dai-41-Kai Nihon Kaku Busshitsu Kanri Gakkai Nenji Taikai Kaigi Rombunshu (Internet), 4 Pages, 2020/11

In light of recent delay of plutonium use in Japan and the increasing criticism of nuclear non-proliferation and nuclear security in the nuclear fuel cycle, the validity of these criticisms will be examined for the sustainable development of the nuclear fuel cycle policy. Issues on the view point of nuclear non-proliferation and nuclear security are examined.